*Special order, Ships in 2-3 Weeks.
All Mil-Spec Harnesses are made to order. We will call you after ordering to finalize and make sure you get the correct harness for your application.
All finalized orders are non-refundable and there is nocancellation.
The Rywire S2000 F-Series AP1 & AP2 (early - cable driven F22C) wire Harness offers Mil-Spec Teflon coated wire using standard factory wire colors with a maximum heat rating of 200°C . The Teflon coated wire is loomed with The highest quality Raychem DR-25 heat shrink covering, and adhesive lined wire junctions to keep moisture out. Each brand new connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a yellow identification label for easy installation. All heavy interference circuits are protected and grounded with proper wire covering.
Rywire Mil-Spec harnesses are 100% quality tested pin to pin, and resistance checked to ensure no voltage fluctuations.
Plug n play for aftermarket ECU/EMS using OEM ECU plugs only.
Harness Connector List
Need a Rywire charge harness? click HERE
- Oil Pressure Sending Unit
- Knock Sensor
- Intake Air Temperature (Intake Manifold Style)
- Oxygen Sensor (Primary 4 Wire)
- 2 Extra Wires
- Injector 1-4
- MAP Sensor
- TPS (Throttle position)
- Coils 1-4
- Electronic Speed Sensor
- Fan Switch
- Cam Intake
- Cam Exhaust
- Reverse Lights
- Engine Coolant Temp
- Starter Signal
- VTEC Solenoid
- ECU Plugs B & C
- Power Distribution Cap